Product Information
<< back to products
L56
General Information
| Features
| Convenient, Easy to Use Controls
| Easy Installation
Efficient, Economical & Safe
| Fuel Costs
| Paint Colours
| Clean & Green
| Warranty
| Service & Parts
How LASERTM Heaters Work
| Combustion Chamber & Flue
| Balanced Flue
Internal Tank
| Power Cuts
| Buying Tips
Combustion Chamber & Flue
The Combustion Chamber and Flue are fully sealed so that no diesel fumes can enter the
heated space. Made of high quality Stainless Steel, (SUS 430 Grade) the entire combustion
chamber, flue pipes and balanced flue assembly, cannot rust or corrode.
The balanced flue assembly (see balanced flue for more information) passes through a 70mm (2 3/4 inch) diameter hole through an outside
wall. For most installations a high level flue is unnecessary, (but is an option - inquire).
To install the balanced flue, disassemble it not the two parts as it is supplied. Fit one part
into the wall hole from the inside of the wall, and the other part from the outside of the
wall, "screw" the two together (the two parts are actually threaded for this purpose), and
when "tight" with the wall between the two parts - the flue is installed. The outer pipe of
the balanced flue (the green pipe in the photos) is always cool, so it is no problem to install
the balanced flue assembly directly into a wall made of highly combustible materials with
complete peace of mind safety. The TOYOTOMI Laser system is 100% approved by NZ Approval
Authority ERMA (The Environmental Risk Management Authority - Wellington).
When the Laser and its Balanced Flue assembly is installed as per the simple, basic, user
friendly instructions, the combustion air is 100% supplied from outside, and the exhaust
gasses are delivered to outside. The pipes are gasket and hose clip sealed so that no
diesel fumes or combusted gasses can ever escape into the occupied heated space.
|
